50 Cal Metal Ammo Can 1-Pack – Military Steel Box Shotgun Rifle Gun Ammo Storage

Locking Hardware for Steel Ammo Can（You will only get the accessories in the picture below, others are not included）
Instructions:
1) Close the lid and latch of the ammo can and mark the center of the hole where the locking hardware will be installed (try to be exact!)

2) Drill a 5/16”hole into the can at the center mark (drilling out a smaller guide hole beforehand may be helpful)

3) Form the outside of the can,insert the locking stud through the drill hole

4) On the inside of the can,put the neoprene washer over the threads of the locking stud,followed by the small washer,and then the nylon lock nut.Tighten the assembly with a wrench,being aware that the “round” side of the locking stud may have sharp edges/burs,so a tool should be utilized on”round”side,not bare hands

5) For ammo cans with large holes,put the large washer between the ammo can’s latch and the padlock in order to prevent the large latch hole from slipping over the padlock

-If you finshin the assembly and find the locking stud is not centered,simply file or drill the ammo can’s latch holes to be larger until the latches properly fit the locking stud
Notice:
50cal can ammo hole dimension is 1/2″
you need to enlarge it,otherwise the lock hardware kit cannot be passed through.
Feedback
If you are satisfied with our products and service, please help to
leave “Positive Feedback”and “5 Perfect Stars” for us
when you receive your items and we will do the same for you.If you have any dissatisfaction, please give us the opportunity to resolve the problem before leave us a negative feedback.
Thanks in advance!